Count To Five

[goroth]

Sweet, I'll bust out the soldering iron on the weekend and see what I can destroy do.

IIRC it's a dual gang pot - which set of lugs is the clean volume Scott?

i would just reflow all of the lugs.

s

Reflowed all the lugs.

[waltdogg]

yeah i should probably sell something i'm not using as well to make for some breathing room for the ct5

[multi_s]

this monster has turned into pure creative insanity
I LOVE IT!
had a question looking over the nifty instruction sheet
the Q↑ & Q↓ modes, how do you control the amount of the parameter?
I'm gonna check Scott's updated FAQ now too, so much has changed and there's so much new stuff.
once there's a way to store a few presets, this will be GLORIOUS.
because I already foresee my notes becoming even more complex to recreate the sounds I'll build with this.
pretty rad. all this from the GB24... never even got to spend real quality time with it due to life.
might need a more OG version in addition. we shall see.
but I see this fulfilling many prophecies for me.

I messaged the author of the sheet suggesting to clear that up but it was ignored. Anyway, you need to turn the knobs while holding the Q. It is explained further down the cheat sheet but ccw is the most low passed and cw allows the most high frequencies through. The mod works the same way. Use len b and fbk knobs to control rate and depth. CW is fastest and deepest mod

I have not had time to review this new sheet, but thanks for sharing it. I can confirm the sheet by NG is absolutely correct. it is just missing what holding down the soft switch does in mode 1, since it was made for update .96 (a major update), not .963 (which only added 1 feature).

how to access the secondary parameters added in .96 is described here.

http://mtlasm.blogspot.ca/2016/07/new-f ... oards.html
https://drive.google.com/file/d/0BwlfmE ... pHNUU/view

Reflowed all the lugs.

great!

we are working on some firmware updates for 856 and ct5 at the moment based on user feedback. both should drop by end of february along with hopefully a new unit. hard to believe it is already end of january :/

s

[decomposing]

this monster has turned into pure creative insanity
I LOVE IT!
had a question looking over the nifty instruction sheet
the Q↑ & Q↓ modes, how do you control the amount of the parameter?
I'm gonna check Scott's updated FAQ now too, so much has changed and there's so much new stuff.
once there's a way to store a few presets, this will be GLORIOUS.
because I already foresee my notes becoming even more complex to recreate the sounds I'll build with this.
pretty rad. all this from the GB24... never even got to spend real quality time with it due to life.
might need a more OG version in addition. we shall see.
but I see this fulfilling many prophecies for me.

I messaged the author of the sheet suggesting to clear that up but it was ignored. Anyway, you need to turn the knobs while holding the Q. It is explained further down the cheat sheet but ccw is the most low passed and cw allows the most high frequencies through. The mod works the same way. Use len b and fbk knobs to control rate and depth. CW is fastest and deepest mod

I have not had time to review this new sheet, but thanks for sharing it. I can confirm the sheet by NG is absolutely correct. it is just missing what holding down the soft switch does in mode 1, since it was made for update .96 (a major update), not .963 (which only added 1 feature).

how to access the secondary parameters added in .96 is described here.

http://mtlasm.blogspot.ca/2016/07/new-f ... oards.html
https://drive.google.com/file/d/0BwlfmE ... pHNUU/view

Reflowed all the lugs.

great!

we are working on some firmware updates for 856 and ct5 at the moment based on user feedback. both should drop by end of february along with hopefully a new unit. hard to believe it is already end of january :/

s

any chance for saving a preset in upcoming wares?
and a ct5 in a big box would be amazing!
more knobs! or external / CV controls?

[multi_s]

any chance for saving a preset in upcoming wares?
and a ct5 in a big box would be amazing!
more knobs! or external / CV controls?

right now the next update will just have 1 preset. it will just write over the power up default for the hidden parameters, and also have a way to restore factory settings. basically you can have 1 favorite setting that it defaults to.

a big box ct5... maybe but it's not the first thing i would do., we are making more devices. what are they... time will tell.

s

[$harkToootth]

Are there maybe more C2:6-1 coming tomorrow still? Or did that other post signify February or was that just for firmware.

I'm sorry your honor. My reading comprehension is on a fifth grade level.

[multi_s]

yes tomorrow we will put more up for sale.

they ship still with firmware .963 which is the most recent available (from a few months ago). we are working on a new update for the same hardware so i was saying that will be out end of feb hopefully. but units for sale, that will be tomorrow. will they work with the update we are talking about? yes they will, you can use any desktop os to update them as well thanks to ~DROD~.

again, those units, up tomorrow.

tomorrow is the day with the units up for sale.

Monday is the day which we will have more units available for purchase.

[$harkToootth]

Lol! Thank you sir. For the "update" and the laugh. Sorry I'm retarded.

[waltdogg]

waiting with bated breath.

[multi_s]

we made a lot so it should not be that hard to get your hands on one, similar size to last run.

s

[waltdogg]

sweeeet.

[zoooombiex]

This is not a big deal at all - but any chance the direction that you hold the q switch down to access the modulation in mode 3 could be switched? In my mind, I sort of link the LFO in mode 1 with the modulation in mode 3. But they are accessed via opposite q switch directions, and I can't seem to remember which is which on the fly in the middle of a show. If, e.g., they were both accessed via a down-push on the q switch I could probably keep that straight and then by process of elimination I could remember which direction for the vol mod in mode 3 and the re-trigger function in mode 1.

Again, no biggie. And thanks Scott. This is truly an amazing piece of work.

[multi_s]

This is not a big deal at all - but any chance the direction that you hold the q switch down to access the modulation in mode 3 could be switched? In my mind, I sort of link the LFO in mode 1 with the modulation in mode 3. But they are accessed via opposite q switch directions, and I can't seem to remember which is which on the fly in the middle of a show. If, e.g., they were both accessed via a down-push on the q switch I could probably keep that straight and then by process of elimination I could remember which direction for the vol mod in mode 3 and the re-trigger function in mode 1.

Again, no biggie. And thanks Scott. This is truly an amazing piece of work.

hmm that is an interesting point. i think it ended up the way it is now because things were not all added at the same time. in mode 1 trigger was implemented before lfo, and in mode 3 volume before modulation.

I don;t know that i will change it at this moment but it is a good point that the alt features could be arranged more logically, so if more are added maybe i will consider it then.

thank you for the thoughtful feedback.

[multi_s]

bump for stock added to store....

[Zijnzijn Zijnzijn!]

Got mine ! Super pumped. Is there a difference between this firmware and the last one?