Can we talk about modular synths?

worra · Post by **worra** » Thu Feb 07, 2019 4:49 pm

baremountain wrote:
worra wrote:
brndnwilliams wrote:heck yea to all of you! are you going with prepared samples in the morph or using it live???
For me it's always live, I don't think I've ever set up a prepared reel for it. I should do that sometime
I'm going with some prepared samples this time around, all from Laraaji's Ambient 3 record, accompanied by some synthy noodle doodles. I'm pretty freakin' excited for it, though the forecast recently went from high sixties to low 50s and possibly rainy.

Talked to Matthew yesterday and the venue is cool if we pull the show inside due to rain so at least there's a backup plan!

behndy · Post by **behndy** » Thu Feb 07, 2019 11:46 pm

lol. annnnnnd look like i mighhhhhht have 4 Triana 2's coming in from a trade.

SO many CV/gate sequencing options!

MrNovember · Post by **MrNovember** » Fri Feb 08, 2019 12:02 am

behndy wrote:lol. annnnnnd look like i mighhhhhht have 4 Triana 2's coming in from a trade.

SO many CV/gate sequencing options!

Oh man, I'm jealous! That's a setup I've always wanted

behndy · Post by **behndy** » Fri Feb 08, 2019 12:34 am

i have been suuuuuper intrigued about them as well!

behndy · Post by **behndy** » Fri Feb 08, 2019 3:38 pm

Ruins - it's not a crossfader, but mebbe this is close to what you're looking for?

https://www.modulargrid.net/e/st-modular-pae

Ruiner · Post by **Ruiner** » Fri Feb 08, 2019 4:32 pm

I've seen a few like that. For now I just got the portable scratch crossfader and can do 1/2 of what I wanted to do with it. just got here yesterday so I'll be trying it out this weekend. For the CV crossfading side of things I found someone working on creating one so may just wait for that or try Addac's VC fader thingy or the Rabid Elephant one if I can find one.

behndy · Post by **behndy** » Fri Feb 08, 2019 5:52 pm

jiggly!

behndy · Post by **behndy** » Fri Feb 08, 2019 9:38 pm

also, i looooove comb filters so.... yeah.grabbing this bug bug -

https://reverb.com/item/16686816-two-ni ... ack-silver

Ruiner · Post by **Ruiner** » Fri Feb 08, 2019 10:04 pm

It works! Check it out!

https://instagram.com/p/BtpLRKRBvlv/

This is the most basic of way I intend to use it but just running the first test. Should be fun!

behndy · Post by **behndy** » Fri Feb 08, 2019 10:13 pm

behndy wrote:also, i looooove comb filters so.... yeah.grabbing this bug bug -

https://reverb.com/item/16686816-two-ni ... ack-silver

oop. thought it was 10 hp, not 14. DEAL BREAKER.

Ruiner wrote:It works! Check it out!

https://instagram.com/p/BtpLRKRBvlv/

This is the most basic of way I intend to use it but just running the first test. Should be fun!

iiiiiii LIKE it!

greyscales · Post by **greyscales** » Sat Feb 09, 2019 6:22 pm

I got a DFAM today. I thought I had watched enough demos to get it banging right away, but of course it isn't that easy.

It's definitely fun though. Lost two hours just jamming away on it and trying to figure out what I'm doing.

yeatsvisitslincoln · Post by **yeatsvisitslincoln** » Sat Feb 09, 2019 10:44 pm

Got the Hertz Donut MKIII in the mail today. Haven't had too much time to explore vs. trying to integrate it into a patch for Freq Boutique on Monday, but with the presets, I found something that works and have played with it a little: http://www.instagram.com/p/BtrMs1GB8WE

I'm loving the sounds that I can get so far. Already have a bunch of ideas for when I have the chance to really explore. Will have more comments later...

Also, I knew it was a signature required package. The FedEx guy knocked on our door at 9 AM this morning and I was still in bed. Sorry to the FedEx guy for answering the door in my underwear and a dirty towel. Modular problems...

mr. sound boy king · Post by **mr. sound boy king** » Sun Feb 10, 2019 12:39 pm

^^that Donut sounds good.

My ADDAC nCHUNK just arrived and it is too fucking deep for any of my cases. It's like 10 cm!

Happy Ending case ordered /sigh

behndy · Post by **behndy** » Sun Feb 10, 2019 1:42 pm

awwwww! that sucks meng. i had that sort of happen with a Thomas White dual resonant LPG module i had made. it BARELY would fit in the deepest part of my PitsMod home case. lol. thing was almost three times as deep as it was wide.

yeah. Donut sounds SO good. hate the odd hp but.... ordered one.

behndy · Post by **behndy** » Mon Feb 11, 2019 10:57 pm

murrrrr. second Make Noise Skiff got in, and it seemed packed pretty well, but the little white plastic tabby bracket things that hold in the psu, only 2 or 3 out of like 10 are unbroken. makes the psu all floaty.

not a deal breaker. shizz happens. i tested each out and the psu seems fine, just not mounted anymore. emailed MN about ordering just the mounts, and if they don't have that i think i know how to fix it.

soons as the 4 Tiranas get in i'm going to make this either an All Sequencers skiff, or a Sequencers/Drum Bits skiff.

ilovefuzz.com

Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?

Re: Can we talk about modular synths?