How do you like the Drone Rainger? How do you use it? I remember watching demos of it, seemed dope as fuck. Is it dope as fuck?UglyCasanova wrote:Setup for ILFEU
Fuzz-E-Cat > Pladask Kniv with Enzo and Dronerainger in loop > Corazòn > Frazz > Meatbox > BioMoon prototype > Stammen
Let's see your PEDAL BOARD!
Moderator: Ghost Hip
- alcohol.won
- involved
- Posts: 53
- Joined: Fri Nov 10, 2017 1:22 pm
Re: Let's see your PEDAL BOARD!
- UglyCasanova
- IAMILFFAMOUS
- Posts: 12534
- Joined: Mon Jul 28, 2014 6:47 am
- Location: Norway
Re: Let's see your PEDAL BOARD!
I got it, I put in on my board for the ILFEU meet up this weekend. That's all I've got for now. 
I'll report back once I've messed with it.

I'll report back once I've messed with it.
iRerror:
http://irerror.bandcamp.com
http://irerror.bandcamp.com
- Dowi
- IAMILF
- Posts: 2658
- Joined: Fri Jan 08, 2016 8:12 am
- Location: Italy
- Contact:
Re: Let's see your PEDAL BOARD!
Love this setup, Bitquest disappeared to make room for the Biological Moon? Wish I was t ILFEU to hear it.UglyCasanova wrote:Setup for ILFEU
Fuzz-E-Cat > Pladask Kniv with Enzo and Dronerainger in loop > Corazòn > Frazz > Meatbox > BioMoon prototype > Stammen
Nice two amp setup, I like the fact that you have everything together and then two different delays for the two channelsChristophe wrote:Bigger board is almost ready. meanwhile, here's my first two-amp board:
Signal chain: Tu --> Mini --> RC boost --> Freeze --> DMM --> Lal 88 --> Bitquest --> A/B split --> ehx 720 --> A side: Memory Loss // B side: DD5
That board is a blast!I've been using it for a few months and I'm just amazed at the possibilities. It's not that many pedals but a lot of them have hidden/secondary functions, and they pair so well together... I really love this selection for the way these pedals match together...
Rc boost is always on. Fave 88 setting: 1-2-3-6 down. Use the Bitquest mainly for bitcrush or ring (love the verb on the ring mode!). ML can be a fucked up delay on only one amp, or fuzz on only one amp!
- Christophe
- committed
- Posts: 326
- Joined: Tue Sep 13, 2016 8:28 am
Re: Let's see your PEDAL BOARD!
Thanks. Yeah, with the A/B before the looper, I can dispatch layers to the left or to the right channel. This brings more clarity when recording multiple layers, and it can also give the illusion that there's two guitars...Dowi wrote:Nice two amp setup, I like the fact that you have everything together and then two different delays for the two channelsChristophe wrote:
Signal chain: Tu --> Mini --> RC boost --> Freeze --> DMM --> Lal 88 --> Bitquest --> A/B split --> ehx 720 --> A side: Memory Loss // B side: DD5
The 2 delays are more than enough to work on the loops if I feel like it. DMM on both sides + reverse DD5 on one channel is glorious! The Memory Loss/Kompact Kassette is heavy on the wet side, it works great with the two amp situation.
"It's wrong but it works."
-
- experienced
- Posts: 555
- Joined: Sun Jan 28, 2018 11:23 am
Re: Let's see your PEDAL BOARD!
My pedalboard is finally pretty done! But I don't have a camera. 

Last edited by VREEEEVROOOOOW on Thu Aug 29, 2019 12:55 pm, edited 1 time in total.
Check out my band, Den elektriske salmebok: http://linktr.ee/salmeboka
- JM Charcot
- committed
- Posts: 123
- Joined: Tue Apr 10, 2018 2:13 am
Re: Let's see your PEDAL BOARD!
.
Last edited by JM Charcot on Wed Dec 08, 2021 5:28 pm, edited 2 times in total.
- IBNYX
- interested
- Posts: 29
- Joined: Fri Sep 28, 2018 10:50 pm
- Location: Western MA, US
Re: Let's see your PEDAL BOARD!
Tryna be more active here (maybe annoyingly so)! Here’s my current board; Swapped out the Multistomp for the LM-2, got the Model feT (which is the freakin’ greatest), have just done a ton of maintenance!
I may swap the tuner to the multistomp for more non-dirt options, and I have a Doom Bloom clone in the mail that is probably gonna upend my whole dirt section.
I accidentally used industrial strength dual-lock on this whole board so I’m gonna have to MAJORLY fuck it up to get everything situated.
I may swap the tuner to the multistomp for more non-dirt options, and I have a Doom Bloom clone in the mail that is probably gonna upend my whole dirt section.
I accidentally used industrial strength dual-lock on this whole board so I’m gonna have to MAJORLY fuck it up to get everything situated.
- Attachments
-
- Current Board!
- 3E440D2C-7224-4F9A-BB85-6B074C525885.jpeg (57.37 KiB) Viewed 4525 times
- alexsga
- experienced
- Posts: 772
- Joined: Sat May 15, 2010 3:21 pm
Re: Let's see your PEDAL BOARD!
very nice what are the three in the top right hand corner?
- systemofameow
- committed
- Posts: 187
- Joined: Mon Jul 17, 2017 10:10 pm
Re: Let's see your PEDAL BOARD!
I've been wanting a Model Fet again pretty damn bad.
- IBNYX
- interested
- Posts: 29
- Joined: Fri Sep 28, 2018 10:50 pm
- Location: Western MA, US
Re: Let's see your PEDAL BOARD!
From R-L:alexsga wrote:very nice what are the three in the top right hand corner?
Luna Audio Basalt (2-Stage Op-Amp Muff w/o tone stack)
DMB Stellar Drive (Rat-based OD, kinda like if a rat and a klon had a baby)
Op-Amp Muff. The 2nd footswitch is a mids toggle, and the toggle switch is a gate.
- hbombgraphics
- IAMILFFAMOUS
- Posts: 8654
- Joined: Tue Aug 17, 2010 2:39 pm
- Location: Central NY
Re: Let's see your PEDAL BOARD!
that's killer!!!!!
What's in the LS-2 chains? How are you using it?
What's in the LS-2 chains? How are you using it?
Gunner Recall wrote:This thread is bad and everyone in it should feel bad.
https://soundcloud.com/hbombgraphicsIommic Pope wrote:This thread is mediocre at best, but I encourage everyone posting in it to feel as awesome as possible.
- Pepsihillo
- involved
- Posts: 56
- Joined: Fri Nov 20, 2009 4:50 am
- Location: Pori, Finland
Re: Let's see your PEDAL BOARD!
I've gone minimalist lately...

Tuner - TC Sub 'n Up - Ram's head Big Muff clone - Pigtronix Quantum - DR Scientist Tremolessence - Gurus Echosex 2 - TC Hall Of Fame mini.
Board is a small Harley Benton spaceship and power comes from a Palmer power plant under the board.
Not a big board and there's nothing too crazy on it, but I can get a lot of stuff done with this.

Tuner - TC Sub 'n Up - Ram's head Big Muff clone - Pigtronix Quantum - DR Scientist Tremolessence - Gurus Echosex 2 - TC Hall Of Fame mini.
Board is a small Harley Benton spaceship and power comes from a Palmer power plant under the board.
Not a big board and there's nothing too crazy on it, but I can get a lot of stuff done with this.
- IBNYX
- interested
- Posts: 29
- Joined: Fri Sep 28, 2018 10:50 pm
- Location: Western MA, US
Re: Let's see your PEDAL BOARD!
hbombgraphics wrote:that's killer!!!!!
What's in the LS-2 chains? How are you using it?
I use it as an amp/channel switch; Loop A has the preamp section of the Quilter, and Loop B has the Model feT in it, and then it runs DD-500 > Deco > Tuner > Limiter > Power Amp
- sylnau
- IAMILFFAMOUS
- Posts: 10403
- Joined: Tue Jan 18, 2011 1:38 pm
- Location: Quebec City
Re: Let's see your PEDAL BOARD!
Just finish this one… so far I like it a lot.
"I can't understand why people are frightened of new ideas. I'm frightened of the old ones." --John Cage
http://www.youtube.com/sylnau
http://www.youtube.com/sylnau
- Chankgeez
- IAMILFFAMOUS
- Posts: 42135
- Joined: Tue Oct 11, 2011 1:40 am
- Location: https://www.youtube.com/watch?v=FGhbeHujNZQ youtube.com/watch?v=V-2l7kkBURc
Re: Let's see your PEDAL BOARD!
sylnau wrote:Just finish this one… so far I like it a lot.

…...........................…psychic vampire. wrote:The important take away from this thread: Taoism and Ring Modulators go together?
Sweet dealin's: here
"Now, of course, Strega is not a Minimoog… and I am not Sun Ra" - dude from MAKENOISE
#GreenRinger