Let's see your AMP!

[riotriot]

That Overdose (new company out of Europe (The Netherlands) building hand built, custom made speaker cabs for bass and guitar) is based on the cab that Verellen sold with the Meatsmoke a while ago. 2x15+2x10. Difference with this one is that it's a sealed enclosure and that the 15" are in it's own compartments. Tight and focussed, but still massive low end.

[goroth]

That Overdose (new company out of Europe (The Netherlands) building hand built, custom made speaker cabs for bass and guitar) is based on the cab that Verellen sold with the Meatsmoke a while ago. 2x15+2x10. Difference with this one is that it's a sealed enclosure and that the 15" are in it's own compartments. Tight and focussed, but still massive low end.

links?

[Iommic Pope]

WHAT THE FUCK, GUYS.
That last page hit me like:

[watchyourscrew]

i can't make my jaw close

[JerEvil]

[JerEvil]

My Decolonizer arrived yesterday, sounds fucking great! Clean channel with 'mid-scoop' mod for dual voicings (Plexi and Fender), achieved with a push/pull Gain knob, plus a 3-way bright switch. Tons of versatility here, makes for a dreamy pedal platform.

Dirt channel is dual mode as well with an OD ranging from clean-ish to beefed up JCM800 and a high gain that goes all the way into Bogner XTC/Soldano territory. Screams! Has a really nice low-mid presence too, lets it sound totally girthy without getting too bassy and loose. Again, lots of versatility in this channel.

I really love the look of Alex's amps too, just gorgeous inside and out. The faceplate and rear panel were done up in a sexy Slate Bronco/Levant tolex I tracked down, turned out killer.




Guts...

That is slick looking. Never heard of these amps but will have to check them out.

[theavondon]

Damn, this page. That Decolonizer is probably gonna be haunting my dreams. And, I love me some YBA-1As.

are we turning into TGP? people around here have got some pretty sweeeeeet gear. as long as I keep playing and using my gear I won't feel bad.

I mean...I did just get a Gibson and a soul food....fuck.

[tjlong]

Damn, this page. That Decolonizer is probably gonna be haunting my dreams. And, I love me some YBA-1As.

are we turning into TGP? people around here have got some pretty sweeeeeet gear. as long as I keep playing and using my gear I won't feel bad.

I mean...I did just get a Gibson and a soul food....fuck.

i loves me some crystal lettuce

[WORMDIRT]

Most of my rig right now..

Got rid of the 5150 to get this Sundown Rebel 100. This thing is loud and weird, just how I like it.

[Iommic Pope]

Blessed by Rasputin.
You know its awesome.

Nice ones man!

[HorseyBoy]

My Decolonizer arrived yesterday, sounds fucking great! Clean channel with 'mid-scoop' mod for dual voicings (Plexi and Fender), achieved with a push/pull Gain knob, plus a 3-way bright switch. Tons of versatility here, makes for a dreamy pedal platform.
Guts...

Oh, man - I can definitely see the Science involved in that. That is flat-out beautiful.

[FancyMike]

new amp day. vt-22 and the amp part will soon be pulled out and put in a headshell.

[Holy Schnikes]

new amp day. vt-22 and the amp part will soon be pulled out and put in a headshell.

Very nice, congrats! I'd most definitely put that in a headshell too, save your back.

Does it still have 7072a power tubes? Then current production 7072a is kinda shitty so if you're ever looking to convert the power tube section/bias resistors go with the KT88s. They sound so fucking good in my V2. So good! I can only imagine they crush in a V4/VT-22.

[FancyMike]

new amp day. vt-22 and the amp part will soon be pulled out and put in a headshell.

Very nice, congrats! I'd most definitely put that in a headshell too, save your back.

Does it still have 7072a power tubes? Then current production 7072a is kinda shitty so if you're ever looking to convert the power tube section/bias resistors go with the KT88s. They sound so fucking good in my V2. So good! I can only imagine they crush in a V4/VT-22.

The main reason to pull it isn't so much my back but that it'll spend most of its time on bass duty pushing 15s. The weight is a nice side benefit though. At ~100 lbs getting the motherfucker into my car then down into the basement was not a nice time.

Still has 7027a tubes, yes. Looks like all the tubes are original still or at least from the era. Not quite sure which direction to go if I change them but I've already got a 4xKT88 amp so not really looking for that. Maybe EL34s?

[ShaunNecro]

new amp day. vt-22 and the amp part will soon be pulled out and put in a headshell.

Very nice, congrats! I'd most definitely put that in a headshell too, save your back.

Does it still have 7072a power tubes? Then current production 7072a is kinda shitty so if you're ever looking to convert the power tube section/bias resistors go with the KT88s. They sound so fucking good in my V2. So good! I can only imagine they crush in a V4/VT-22.

The main reason to pull it isn't so much my back but that it'll spend most of its time on bass duty pushing 15s. The weight is a nice side benefit though. At ~100 lbs getting the motherfucker into my car then down into the basement was not a nice time.

Still has 7027a tubes, yes. Looks like all the tubes are original still or at least from the era. Not quite sure which direction to go if I change them but I've already got a 4xKT88 amp so not really looking for that. Maybe EL34s?

I went with 6550s for my V4, and it sounds fantastic! I really love the sound I get from pushing it to it's max, breaks up and fuzzes so fucking nice.