The Doom Room: ILF Edition

ilovedoom @ ilovefuzz
User avatar
pelliott
IAMILF
IAMILF
Posts: 2077
Joined: Sun Jan 13, 2013 5:02 pm
Location: Detroit MI

Re: The Doom Room: ILF Edition

Post by pelliott »

CaptainBoxman wrote:No dice unfortunately

Bloody thing isn't working properly - sounds like the ocean is trying to get through the speakers


Matamp are gonna have it back, seems like it was damaged in transit


were all your amps built on top of an indian burial ground?
User avatar
Ancient Astronaught
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 7202
Joined: Tue Jul 12, 2011 9:14 pm
Location: Bear Country

Re: The Doom Room: ILF Edition

Post by Ancient Astronaught »

CaptainBoxman wrote:No dice unfortunately

Bloody thing isn't working properly - sounds like the ocean is trying to get through the speakers


Matamp are gonna have it back, seems like it was damaged in transit


Congrats on the new amp! Sucks its gotta go back but....

At some point your going to have to realize that every amp you touch has issues. I don't think its always the amp, you might be one of those rare people with a weird magnetic field that disrupts electronics. No joke its a thing, my mom suffers from it, an i've seen touch screen appliances do absolutely weird shit when she touches it but when i use it it has no issues what so ever. Remember the orange where it would do weird shit for you but when getting fixed nobody could duplicate the issue? I dunno man just something to think about.
Iommic Pope wrote: Skip, you rule. You hate people so much, you're willing to discredit all human progress, its awesome.
User avatar
conky
IAMILF
IAMILF
Posts: 2211
Joined: Tue Nov 16, 2010 2:46 pm
Location: Georgia
Contact:

Re: The Doom Room: ILF Edition

Post by conky »

Sucks about the Matamp Boxman. Hope you get it sorted out and end up with the best tone ever since you've had all these troubles.

Can anyone tell me which positions the diodes on the Badascan are? I can't remember. I was using the switch all the way down on the recording and at practice, but I started fucking around with it yesterday morning on the other two settings and was getting some pretty insane tone from it. I need to do a side by side comparison with my Pharaoh soon. I can't remember which diodes are which on that one either. I got an early one when he was just starting that has no writing on it and a 2 way switch.
User avatar
samzadgan
IAMILF
IAMILF
Posts: 2723
Joined: Thu Jan 17, 2013 5:10 pm
Location: amongst idiots...

Re: The Doom Room: ILF Edition

Post by samzadgan »

Ancient Astronaught wrote:
CaptainBoxman wrote:No dice unfortunately

Bloody thing isn't working properly - sounds like the ocean is trying to get through the speakers


Matamp are gonna have it back, seems like it was damaged in transit


Congrats on the new amp! Sucks its gotta go back but....

At some point your going to have to realize that every amp you touch has issues. I don't think its always the amp, you might be one of those rare people with a weird magnetic field that disrupts electronics. No joke its a thing, my mom suffers from it, an i've seen touch screen appliances do absolutely weird shit when she touches it but when i use it it has no issues what so ever. Remember the orange where it would do weird shit for you but when getting fixed nobody could duplicate the issue? I dunno man just something to think about.



like this guy...
[youtube]http://www.youtube.com/watch?v=_hT5cGnk2DY[/youtube]
AxAxSxS wrote:...if its a loud tube amp.... :doom:
Iommic Pope wrote:Amps first, makeup sex later.
User avatar
pelliott
IAMILF
IAMILF
Posts: 2077
Joined: Sun Jan 13, 2013 5:02 pm
Location: Detroit MI

Re: The Doom Room: ILF Edition

Post by pelliott »

rub your feet on the carpet really fast then touch a doorknob during a lightning storm then try the amp
User avatar
Ancient Astronaught
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 7202
Joined: Tue Jul 12, 2011 9:14 pm
Location: Bear Country

Re: The Doom Room: ILF Edition

Post by Ancient Astronaught »

samzadgan wrote:like this guy...
[youtube]http://www.youtube.com/watch?v=_hT5cGnk2DY[/youtube]


Kinda, just a little bit.... but kinda. :lol:
Iommic Pope wrote: Skip, you rule. You hate people so much, you're willing to discredit all human progress, its awesome.
User avatar
CaptainBoxman
experienced
experienced
Posts: 749
Joined: Sun Jan 13, 2013 5:31 pm
Location: Plymouth, UK

Re: The Doom Room: ILF Edition

Post by CaptainBoxman »

Image
Iommic Pope wrote: The Boxman hails the Mountain,
Zion's rays descend.
User avatar
ryan summit
Supporter
Supporter
Posts: 6194
Joined: Wed Jun 06, 2012 10:11 am
Location: charlton hestons cold dead hands,exit 21,NY

Re: The Doom Room: ILF Edition

Post by ryan summit »

conky wrote:
Can anyone tell me which positions the diodes on the Badascan are?


im not 100% on this
but what i remember is

GE
LED
out

i was always diodes out too
was definately fuller and louder
ive switched recently too
could it have anything to do with the new 612s
we both got'em and both switched
im pretty sure all the way up is germanium
or silicon?
whatever thats the one sounds good to me now
User avatar
conky
IAMILF
IAMILF
Posts: 2211
Joined: Tue Nov 16, 2010 2:46 pm
Location: Georgia
Contact:

Re: The Doom Room: ILF Edition

Post by conky »

I thought LED was on the bottom because that setting was a little bit tighter and had lower output than the other two?

EDIT:

like from top to bottom:

GE
diodes out
LED

:idk:

Talking about the Badascan , BTW. I think Pharaoh settings are:

Ge
Si
User avatar
pelliott
IAMILF
IAMILF
Posts: 2077
Joined: Sun Jan 13, 2013 5:02 pm
Location: Detroit MI

Re: The Doom Room: ILF Edition

Post by pelliott »

I think the middle setting on both Badascan and Pharaoh are Diodes out and up on both is GE, pretty sure you're right -- down is LED
User avatar
conky
IAMILF
IAMILF
Posts: 2211
Joined: Tue Nov 16, 2010 2:46 pm
Location: Georgia
Contact:

Re: The Doom Room: ILF Edition

Post by conky »

Went and test drove a few vans a few days ago. Ended up settling on one that hopefully (fingers crossed) I'll be picking up tomorrow. Part of the deal was getting better tires on it, but it will definitely need a tune up, oil change and an alignment. Fucking excited. Can't decide on if I wanna put a church logo on the side so nobody will fuck with it, or spray paint "Free candy" on it to fuck with the neighborhood.
User avatar
t-rey
IAMILF
IAMILF
Posts: 2833
Joined: Wed May 05, 2010 10:55 am
Location: Wilmington, NC

Re: The Doom Room: ILF Edition

Post by t-rey »

CaptainBoxman wrote:No dice unfortunately

Bloody thing isn't working properly - sounds like the ocean is trying to get through the speakers


Matamp are gonna have it back, seems like it was damaged in transit


NOOOOOOOO :no:

conky wrote:I thought LED was on the bottom because that setting was a little bit tighter and had lower output than the other two?

EDIT:

like from top to bottom:

GE
diodes out
LED

:idk:

Talking about the Badascan , BTW. I think Pharaoh settings are:

Ge
Si


My v1 Pharoh was Si/no diodes. I thought the Badascan was Si instead of Ge, but I'm not really sure about that.

And you should definitely do a church logo for the van....and we should help you decide what it says.
User avatar
christianatl
FAMOUS
FAMOUS
Posts: 1632
Joined: Thu Oct 22, 2009 10:42 pm
Location: ATL

Re: The Doom Room: ILF Edition

Post by christianatl »

conky wrote:Went and test drove a few vans a few days ago. Ended up settling on one that hopefully (fingers crossed) I'll be picking up tomorrow. Part of the deal was getting better tires on it, but it will definitely need a tune up, oil change and an alignment. Fucking excited. Can't decide on if I wanna put a church logo on the side so nobody will fuck with it, or spray paint "Free candy" on it to fuck with the neighborhood.


pics plz
https://www.facebook.com/pages/Whores/108004672554176
http://whores.bandcamp.com
http://whores.bigcartel.com

WTB: Chase Bliss Tonal Recall, Keeley 30ms Delay, cool fuzzes and hand-painted stuff.
User avatar
Ancient Astronaught
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 7202
Joined: Tue Jul 12, 2011 9:14 pm
Location: Bear Country

Re: The Doom Room: ILF Edition

Post by Ancient Astronaught »

conky wrote:Went and test drove a few vans a few days ago. Ended up settling on one that hopefully (fingers crossed) I'll be picking up tomorrow. Part of the deal was getting better tires on it, but it will definitely need a tune up, oil change and an alignment. Fucking excited. Can't decide on if I wanna put a church logo on the side so nobody will fuck with it, or spray paint "Free candy" on it to fuck with the neighborhood.


They will still fuck with it with a church sign on there. Seen it happen.

Your best bet is to use a sign like Port-a-John Cleaners, or Deep Down n Dirty Sewage Line Cleaners. Something thats gonna make any wanna be thief double think whats actually in there and if they even wanna touch it.
Iommic Pope wrote: Skip, you rule. You hate people so much, you're willing to discredit all human progress, its awesome.
User avatar
ShaolinLambKiller
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 3741
Joined: Thu Feb 27, 2014 8:41 pm
Location: The South

Re: The Doom Room: ILF Edition

Post by ShaolinLambKiller »

make it a dirty diapers pick up service for those who use cloth diapers. I know there are such things. cause even with the above por a john and sewage line cleaners... there will still be an assumption there are tools/equipment to be stolen even covered in shit it's worth breaking in to.

making it dirty diapers pick up... only give the impression it'll be filled with shit covered diapers and nothing else.
I like to keep myself busy:
My loud heavy boxes:
www.facebook.com/MaulerCustomCabs

a ton of my music
http://speedritualrecords.storenvy.com/

and a ton of my ugly art
http://www.cavepaints.com/
Post Reply