Page 2 of 3

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 9:18 am
by McSpunckle
jdavyd wrote:lame. is it a really dramatic boost then?


Very noticeable. I keep my looper's gain as high as I can without it clipping, and the pedal will clip it pretty hard.

It has a level control, but it doesn't go down low enough. Maybe there's a trim pot in there I don't know of, though. I recently learned Dunlop/MXR have been doing that sorta thing.

It also has a bit of a delay before it turns off... but, my Dunlop 105q had a trim pot to fix that, so maybe the Variphase does too.

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 9:37 am
by ohsojayadeva
yeah my bad horsie had a trim for that as well. it's pretty much instantly on, but sometimes there's a delay when stepping off. there's a trick to it though, with the rocker all the way back the effect turns off, so if you slide back out of a note and then step off fast enough, it's seamless.

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 10:04 am
by McSpunckle
I had to open it up to check...

There's a single trim pot on the inside. I can't find any info on what it does.... I'll email MXR about it. Just because if it fixes the boost... I get to put it back on my pedalboard.

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 10:10 am
by ohsojayadeva
rock on. make sure you post back with your results.

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 2:39 pm
by McSpunckle
Alright... so I got a reply.

"It sets the frequency of the oscillation. The phase will sound off rhythmically if altered."


...is it bad that only makes me wanna mess with it more?

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 2:41 pm
by ohsojayadeva
:haha:

i can't help but feel like there must be another answer here. have you tried googling up mods for the pedal?

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 3:15 pm
by McSpunckle
I have. It seems like nobody has them.

I guess paying $200 for what is basically a Phase 90 (But it's both types! script and block letter!) isn't a popular thing...

Bastards.

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 3:17 pm
by ohsojayadeva
what about 'that famous r28 mod' - would that work on the variphase? it's supposed to make the effect more subtle anyway, right? could help.

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 3:23 pm
by McSpunckle
Well... these are SMD components... so modding won't be easy.

There's a changeable jumper dealy inside the pedal that switches between the script and modern sound. (the pedal says "shallow" and "deep").

I guess that would be similar, if that's not actually what it does.



Also...

All your thread are belong to us. :rock:

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 3:29 pm
by ohsojayadeva
McSpunckle wrote:All your thread are belong to us. :rock:


:dance: :dance: :dance:

is the pedal too loud in both modes?

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 3:34 pm
by McSpunckle
Yeah. It has the volume jump in both modes. Honestly, there's not a hell of a lot of difference in the two.

BUT! I will say something for it. It worked GREAT when fed into a normal Phase 90.

I usually used the Variphase for a slow phase, and set the Phase 90 up really high. It was a really cool effect.

Sadly, I sold the Phase 90, and it doesn't work well with an EHX Small Stone.

And the volume jump is OK when using it for solos. But it lets you boost more anyways.



...maybe I could wire a small trim pot to the switch to cut the volume a bit when it goes into the pedal... :?:

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 3:39 pm
by ohsojayadeva
if you ever decide you want to trade it away or something, let me know.

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 3:44 pm
by McSpunckle
...I'd love to. :haha:

But I sorta broke the jumper...

...and from the factory one of the holes where the feet mount wasn't drilled...

:grumpy:

Re: What pedals do you use for modulation?

Posted: Fri Nov 14, 2008 9:09 pm
by dorfmeister
Moog Ring Mod! :dance:

Re: What pedals do you use for modulation?

Posted: Sat Nov 15, 2008 12:39 pm
by Ghost Hip
I use the flanger in my SMM w/H.... I'm also getting a Q-tron. :idk: