ilovefuzz.com

It should be good. There haven't been any new firmwares since then and the boards haven't limited anything in years.

oldangelmidnight wrote:It should be good. There haven't been any new firmwares since then and the boards haven't limited anything in years.

Great, thanks @oldangelmidnight

Firmware feature request

Hi.
It would be great if the expression pedal and pots could override one another. Would have to decide which control method would take precedence for initial powerup or when mode switching. Either way, sometimes would be cool to switch between control by either of these without having to unplug/replug the expression pedal.
Thanks a million. Best pedal ever…

hce wrote:Firmware feature request

Hi.
It would be great if the expression pedal and pots could override one another. Would have to decide which control method would take precedence for initial powerup or when mode switching. Either way, sometimes would be cool to switch between control by either of these without having to unplug/replug the expression pedal.
Thanks a million. Best pedal ever…

Hi,

It would be possible to make it so just whatever was most recently moved takes precedence or something like that. It's not a bad idea.

S

Big love Scott!

oldangelmidnight wrote:Big love Scott!

multi_s wrote: It would be possible to make it so just whatever was most recently moved takes precedence or something like that. It's not a bad idea.

S

I know this has been mentioned before here, but would it be possible for an option to switch expression control to soft switch? say selected by holding soft switch while holding q or by triple tapping when bypassed? expression could function as soft switch by threshold crossing?
This could also free up soft switch as modifier for E switch for selecting which function the knobs control e.g. in mode 3, between DIR, Len s, rand amount??? would be wicked to have different sample lengths in mode 3……

hce wrote:

multi_s wrote: It would be possible to make it so just whatever was most recently moved takes precedence or something like that. It's not a bad idea.

S

I know this has been mentioned before here, but would it be possible for an option to switch expression control to soft switch? say selected by holding soft switch while holding q or by triple tapping when bypassed? expression could function as soft switch by threshold crossing?
This could also free up soft switch as modifier for E switch for selecting which function the knobs control e.g. in mode 3, between DIR, Len s, rand amount??? would be wicked to have different sample lengths in mode 3……

Yes maybe something like that is possible. We should have some fw update later this year because we have to up rev the PCB anyway.

Hi.
Maybe a bit of a picky suggestion here: sometimes in modes 2/3, accidentally clear a carefully layered buffer because not quick enough releasing soft switch. Be cool to have a speed limit on re-engaging soft switch to prevent accidental hyper toggling. Thanks

hce wrote:Hi.
Maybe a bit of a picky suggestion here: sometimes in modes 2/3, accidentally clear a carefully layered buffer because not quick enough releasing soft switch. Be cool to have a speed limit on re-engaging soft switch to prevent accidental hyper toggling. Thanks

hi im not sure i totally follow, a clear happens when you do a short click. so it seems you would clear the buffer by accidentally holding for too short a time, not too long? or maybe i don't quite understand what you mean.

multi_s wrote:hi im not sure i totally follow, a clear happens when you do a short click. so it seems you would clear the buffer by accidentally holding for too short a time, not too long? or maybe i don't quite understand what you mean.

I think at the soft switch's 'point of contact' the pedal can toggle very quickly as in the above example, if you raise your foot too slowly.
Perhaps I should just train myself to lift my foot more decisively. Of course might be just my particular pedal for some reason… if you've never experienced it then maybe so……
thanks for replying

(…subscribed to thread but not getting notifications for some reason……)

ok it should have some debounce but maybe it is not long enough in some cases. iirc the code works something like the following

if the button is pressed for a period below some length of time t1 then it is completely ignored. (debounce)

if the button is pressed for a period longer than t1 but shorter than t2 then it is registered as a 'tap' gesture

if the button is pressed for a period longer than t2 is is considered a 'hold' gesture.

( 0 < t1 < t2 )

hce wrote:
I think at the soft switch's 'point of contact' the pedal can toggle very quickly as in the above example, if you raise your foot too slowly.
Perhaps I should just train myself to lift my foot more decisively. Of course might be just my particular pedal for some reason… if you've never experienced it then maybe so……
thanks for replying

(…subscribed to thread but not getting notifications for some reason……)

it would not surpise me if notifs don't work on this forum anymore. it seems sort of in decay unfortunately. you can email me directly support@mtlasm.com if you want and send a video if the switch issue is happening a lot and we can see if it is something more than just your pressing style etc.

s

meant to post this yesterday but things were a bit... not quite back?

happy 10th anniversary ct5 (thread?)

thank you ilf. glad it is back up finally :*)

-xox

sm.

multi_s wrote: ↑Thu Sep 26, 2024 8:01 pm meant to post this yesterday but things were a bit... not quite back?

happy 10th anniversary ct5 (thread?)

thank you ilf. glad it is back up finally :*)

-xox

sm.

The Count To 5 is a happy and smiling presence.

Count to Ten!