Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 12:06 am
- image.jpeg (90.42 KiB) Viewed 3014 times
Page 2202 of 2752
Got a thing tomorrow and here's what I'm gonna bring.
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 12:26 am
Pretty well, adds a little more high end and sound a bit less compressed. Also more gain which is always a plus.MechaGodzilla wrote:Oooh SF into Buzzz, how does that work out for you?nieh wrote:sold quite a few things to buy a jazzmaster, down to this. would ideally like to add a tap trem, vibrato and mini wah eventually, and change the soul food to a fuck.
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 2:12 am
Muh bass board. The black box near the middle is a crossover which has been part of my setup for a while now. I send the highs to the vol/wah on the right so I can fade them in like a tone knob, or wah the highs while keeping the lows intact. The dry out of the octaver goes to the deluxe muff pie, which has the left volume after it for fading muh fuzz in and out, plus the expression pedal far left which sweeps its mids. The DOD resistance mixer is the final stage, blending the lows, highs, and fuzz.
You can't really see it but the board, which is 3/4" plywood and aluminum duct tape, has a handle hole cut through its right end.
You can't really see it but the board, which is 3/4" plywood and aluminum duct tape, has a handle hole cut through its right end.
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 5:38 am
Sweep the mids, Johnny.
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 7:53 am
Invisible Man wrote:Sweep the mids, Johnny.
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 8:34 am
that is flipping awesome, plus aliens won't be able to scan it!
want a flow chart of how that all works
want a flow chart of how that all works
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 9:34 am
Slayers gonna slay...JonnyAngle wrote:
Got a thing tomorrow and here's what I'm gonna bring.
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 9:40 am
Jonathan/Jack/Jonny: Tell me about those dual Ditto X2s and what you're using them for!
That board is sick, sick, siiiiiick!
That board is sick, sick, siiiiiick!
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 9:42 am
Yes to all of the above.UglyCasanova wrote:Jonathan/Jack/Jonny: Tell me about those dual Ditto X2s and what you're using them for!
That board is sick, sick, siiiiiick!
Also dat UVERBIA
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 11:21 am
So ditto #1 is first in the chain. So maybe I want to play a little ditty or drone and twiddle knobs. I play whatevs into ditto #1 and put my guitar down. That way I don't have to play and twiddle my knob at the same time.UglyCasanova wrote:Jonathan/Jack/Jonny: Tell me about those dual Ditto X2s and what you're using them for!
That board is sick, sick, siiiiiick!
ditto #2 is second to the last pedal. I have the uverbia as last. So when I get some awesome sounds I do ditto #2 and keep that looping about all over the place, then I'll clear ditto #1. Repeat
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 11:22 am
and I ALMOST sold itDisarm D'arcy wrote:UglyCasanova wrote:
Also dat UVERBIA
..glad i didnt
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 11:22 am
John wrote:Invisible Man wrote:Sweep the mids, Johnny.
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 3:05 pm
rustywire wrote:John wrote:Invisible Man wrote:Sweep the mids, Johnny.
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 6:59 pm
Well played.JonnyAngle wrote:So ditto #1 is first in the chain. So maybe I want to play a little ditty or drone and twiddle knobs. I play whatevs into ditto #1 and put my guitar down. That way I don't have to play and twiddle my knob at the same time.UglyCasanova wrote:Jonathan/Jack/Jonny: Tell me about those dual Ditto X2s and what you're using them for!
That board is sick, sick, siiiiiick!
ditto #2 is second to the last pedal. I have the uverbia as last. So when I get some awesome sounds I do ditto #2 and keep that looping about all over the place, then I'll clear ditto #1. Repeat
I've been wanting to do this with 2 LFLJ for years...
Re: Let's see your PEDAL BOARD!
Posted: Thu Oct 20, 2016 7:19 pm
The current cast of chicka-chicky clang-clang
Chain jumps around: Skinpimp MK2 > Collins HP-1 > Pretty Years > EBVP > '79 King Wah > Dejavibe > LFLJ > PolyFlange > DMM
In addition to more stuff I want a board with deeper footprint. Thinking 14" or 35cm would be ideal, so I can comfortably fit Pretty Years in front of big box EHX
Chain jumps around: Skinpimp MK2 > Collins HP-1 > Pretty Years > EBVP > '79 King Wah > Dejavibe > LFLJ > PolyFlange > DMM
In addition to more stuff I want a board with deeper footprint. Thinking 14" or 35cm would be ideal, so I can comfortably fit Pretty Years in front of big box EHX