Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 10:53 am
Underrated MS paint face on the none-more-black board of justice.hotknife wrote:
Page 2285 of 2752
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 10:59 am
all black board is completely killer and would completely confuse me.
I don't function well when I don't know what a knob does
I don't function well when I don't know what a knob does
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 11:09 am
Just a regular 1590aInvisible Man wrote:Honestly dude what I want to do is commission a super long skinny enclosure and stick it at the back of the board. I have about 1.5" that I could use to build out an aux switch for the Eventide, a 1590A-sized looper (Mooer/Ditto) that I build/rehouse into the enclosure, and/or a 3.5mm patchbay a la the BB Patchulator. But I think I could reasonably only do 2 out of 3. And I'm not sure which 2...JonnyAngle wrote:I have a Mooer looper that is basically the small ditto that I'm not using. I can even paint it black for you.
Anyway, thanks--I may take you up on that. That would actually work better than a Ditto because of the Ditto's weird-ass TC enclosure. Do you have a gutshot of the Mooer?
EDIT: Ah, the Mooer has a weird ass-enclosure, too, but I may be able to work with that.
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 11:32 am
Laughed.hotknife wrote:
How do you even navigate the knobs on the pitch factor with it all black? But it all looks dope!
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 11:51 am
I actually had a really hard time with Eivind's board for this reason: the etches look amazing but it's really difficult to dial in the sounds you want when you don't know what's what.hbombgraphics wrote:all black board is completely killer and would completely confuse me.
I don't function well when I don't know what a knob does
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 1:29 pm
Form over function.Brandsmannen wrote:How do you even navigate the knobs on the pitch factor with it all black? But it all looks dope!
But seriously: the display tells you what every knob is when you move it. And I really don't use all the algorithms, so it isn't that hard to figure out/remember.
Also: there's a part of me that really likeS that no one else could figure this out. It's just for me. Ditto for painting it black/ruining it--THEY BELONG TO ME.
Ah, I thought there were a bunch of weird doors/compartments on it. WRONGJonnyAngle wrote:Just a regular 1590a
Thanks for the makeover, hotknife. It is an improvement.
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 2:22 pm
it is cool that nobody else could grab your board and just use it
cool for you....the rest of us who want to try your board are a little bummed.
If I ever were in a position where I could try it I would want advanced notice so I could make a map of all the knobs
cool for you....the rest of us who want to try your board are a little bummed.
If I ever were in a position where I could try it I would want advanced notice so I could make a map of all the knobs
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 2:24 pm
Presets? Good memory?Brandsmannen wrote: How do you even navigate the knobs on the pitch factor with it all black?
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 2:51 pm
Invisible Robocop doesn't smoke the devil's lettuce
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 3:39 pm
Yeah not be a smartass or dummy, but
1)FFF isn't tough; I have them memorized.
2) Mini is dead simple to remember; well laid-out.
3) Pitchfactor is a pain in the butt, but the labels don't really help much anyway, as they change in every mode, and the display tells you everything you need to know as you adjust them.
4) BitQuest is complex even with labels. Tone, Mix and Volume are the only consistent ones--the others are labeled '0,' '1' and '2.' Not a great help without memorization or a cheat sheet.
5) Ct5 has them stamped in the enclosure.
1)FFF isn't tough; I have them memorized.
2) Mini is dead simple to remember; well laid-out.
3) Pitchfactor is a pain in the butt, but the labels don't really help much anyway, as they change in every mode, and the display tells you everything you need to know as you adjust them.
4) BitQuest is complex even with labels. Tone, Mix and Volume are the only consistent ones--the others are labeled '0,' '1' and '2.' Not a great help without memorization or a cheat sheet.
5) Ct5 has them stamped in the enclosure.
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 3:45 pm
shiet. makes me wanna decolorize some of my pedals now.
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 3:53 pm
Can confirm; is correct.
Now do the Pitchfactor.
IIIIII'VE GOT A STRAIGHT EDGE
Now do the Pitchfactor.
Hell's nah I don't.gnomethrone wrote:Invisible Robocop doesn't smoke the devil's lettuce
IIIIII'VE GOT A STRAIGHT EDGE
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 4:11 pm
I always play with Morello maxed.
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 4:56 pm
if that bitquest breakdown existed a few months back I might have kept mine
on my pitchfactor I have the Morello at about 60%
on my pitchfactor I have the Morello at about 60%
Re: Let's see your PEDAL BOARD!
Posted: Wed Jan 18, 2017 4:59 pm
