ilovefuzz.com

Since I can't find the thread I wanted because of all things purple..

Large pedalboard power units:

What one is the least noisy?
What one has the MOST isolation?
What is the airspeed velocity of a swallow smashing a shell pink jazzmaster?

Blackened Soul wrote: What is the airspeed velocity of a swallow smashing a shell pink jazzmaster?

Leaded or unleaded?

quotation marks are yer friendo
just ran a search for "power supply" to largely purple-free results
I have a Decibel 11 Hot Stone and a Strymon Ojai, and don't have any reason to complain about either....
Keep noticing folks seem happy with CIOKS and the Eventide branded equivalent

Dandolin wrote: quotation marks are yer friendo
just ran a search for "power supply" to largely purple-free results
I have a Decibel 11 Hot Stone and a Strymon Ojai, and don't have any reason to complain about either....
Keep noticing folks seem happy with CIOKS and the Eventide branded equivalent

yeah i have the eventide/coiks one and its good! serves all my needs and has the flexibility to adapt for my future needs

Cool, ok now.. how much tube gear are you guys running? I have 2 tube pedals on may board atm..

I think the next question has to be, what NOS tubes have you been rolling in those

Nothing super mojoz, I'm using sovtek pro aduio grade, which are already low noise but I'm using them because im going for note separation in chords played on cello and upright with a bow and using piezos.. Commimg up with dirt that worked has been a battle... All my wonderful fuzz and distortions... Mush...

Blackened Soul wrote:Nothing super mojoz, I'm using sovtek pro aduio grade, which are already low noise but I'm using them because im going for note separation in chords played on cello and upright with a bow and using piezos.. Commimg up with dirt that worked has been a battle... All my wonderful fuzz and distortions... Mush...

Note separation? Why not just play an arpeggio then?

Blackened Soul wrote:Since I can't find the thread I wanted because of all things purple..

Large pedalboard power units:

What one is the least noisy?
What one has the MOST isolation?
What is the airspeed velocity of a swallow smashing a shell pink jazzmaster?

I use the onespot pro cs12, and it is excellent. The only thing I found that could handle the timebender, but it has hella switching options as well. I use it to power quite a few power hungry units like the eventide space and el capistan as well.

fcknoise wrote:

Blackened Soul wrote:Since I can't find the thread I wanted because of all things purple..

Large pedalboard power units:

What one is the least noisy?
What one has the MOST isolation?
What is the airspeed velocity of a swallow smashing a shell pink jazzmaster?

I use the onespot pro cs12, and it is excellent. The only thing I found that could handle the timebender, but it has hella switching options as well. I use it to power quite a few power hungry units like the eventide space and el capistan as well.

Cool, I'll take a look. Have you ever had issues with digital noise from things like loopers get into your signal with this?

The thing that really started this is I am running a voodoo 2 and I have to run my loopers [jamman express] on a normal one spot or I get the high pitched digital noise in my signal So I either need to find a "better" power unit or switch to different loopers.. and I NEED 2 loopers.

Blackened Soul wrote:

fcknoise wrote:

Blackened Soul wrote:Since I can't find the thread I wanted because of all things purple..

Large pedalboard power units:

What one is the least noisy?
What one has the MOST isolation?
What is the airspeed velocity of a swallow smashing a shell pink jazzmaster?

I use the onespot pro cs12, and it is excellent. The only thing I found that could handle the timebender, but it has hella switching options as well. I use it to power quite a few power hungry units like the eventide space and el capistan as well.

Cool, I'll take a look. Have you ever had issues with digital noise from things like loopers get into your signal with this?

The thing that really started this is I am running a voodoo 2 and I have to run my loopers [jamman express] on a normal one spot or I get the high pitched digital noise in my signal So I either need to find a "better" power unit or switch to different loopers.. and I NEED 2 loopers.

Never really had that issue as far as I can remember..

fcknoise wrote:

Blackened Soul wrote:Since I can't find the thread I wanted because of all things purple..

Large pedalboard power units:

What one is the least noisy?
What one has the MOST isolation?
What is the airspeed velocity of a swallow smashing a shell pink jazzmaster?

I use the onespot pro cs12, and it is excellent. The only thing I found that could handle the timebender, but it has hella switching options as well. I use it to power quite a few power hungry units like the eventide space and el capistan as well.

big up for the CS12, i've powered everything with that one ---> the board in the picture here was powered entirely with it and nothing else, with all the current draw and 9-18-VDC + polarity differences. Never had a problem with the loopers too.



I even wrote a post about it when i succeeded - see the last post in this page.
viewtopic.php?f=149&t=11555&hilit=pds+1002&start=44760

hope it helps

Dowi wrote:

fcknoise wrote:

Blackened Soul wrote:Since I can't find the thread I wanted because of all things purple..

Large pedalboard power units:

What one is the least noisy?
What one has the MOST isolation?
What is the airspeed velocity of a swallow smashing a shell pink jazzmaster?

I use the onespot pro cs12, and it is excellent. The only thing I found that could handle the timebender, but it has hella switching options as well. I use it to power quite a few power hungry units like the eventide space and el capistan as well.

big up for the CS12, i've powered everything with that one ---> the board in the picture here was powered entirely with it and nothing else, with all the current draw and 9-18-VDC + polarity differences. Never had a problem with the loopers too.



I even wrote a post about it when i succeeded - see the last post in this page.
viewtopic.php?f=149&t=11555&hilit=pds+1002&start=44760

hope it helps

Holy shit that is so good, I am learning more than I knew from this. I am running like 1/3 of those pedals. They are still all in the netherlands but I do have a pic of what I ran on it. Of course with plenty of power left over

when your reverb.com saved search for "The Out Sound" keeps sending emails for this jawn:
http://reverb.com/item/32040539-sound-p ... me-ver-red

Fun demo/promo/ad
[youtube]http://www.youtube.com/watch?v=SmwgeLIaZbQ[/youtube]
http://www.youtube.com/watch?v=SmwgeLIaZbQ

The frills!