I have trouble remembering half of the modes in MKI and I'm pretty sure there are only 16. 64 is crazy. I totally agree, it's really not a fun module at all, but it is pretty useful and since no one would buy an MKI for a reasonable amount of money at this point, I'll probably keep it around foreverlumena wrote:I just sold one. I had it for about six weeks. It was the least fun module ever, lots of ways to use it and you need a list to keep track of all the settings. It is possible to set up presets but frankly it was just buzz kill to have to stop and find which quantizer does what or try to remember where the delay is.it has close to 64 different machines in there.(mk4) Its small and somewhat awkward with every thing plugged in. 4hp
Ok flame off
On the plus side sound quality is good on the fx, it does several sample playback methods and most of the utilities you might want are there... lfo,sequencer etc. its a very good value of functions for dollars.
It will depend on your method but for me I want to feel my way toward a sound. Ya, i read manuals and am down with software (ableton,ozone,omnisphere etc.) but that is not the reason i have a eurorack. It was too heady for me.
Can we talk about modular synths?
Moderator: Ghost Hip
- MrNovember
- Modulae of BILF
- Posts: 5314
- Joined: Wed Apr 17, 2013 2:24 pm
- Location: GTA
Re: Can we talk about modular synths?
- behndy
- Supporter
- Posts: 19864
- Joined: Tue Sep 15, 2009 3:06 am
- Location: Cali. East Bay Yo.
- Contact:
Re: Can we talk about modular synths?
jia. pretty much my thoughts.lumena wrote:I think outboard mixers are better unless you have some cv type things you want to do. If you are playing out often there is a mixer at the venue. I had a make noise rosie in my case for a while but I noticed the fidelity not as good as a cheap soundcraft mixer, so in euro fidelity will cost more. Also offboard mixers often have simple eq that can really clean things up mudwise. There is also the send bus which could buffer and shape signals back into your rack for more sound sculpting.
I use one of these to boost/att. To the mixer...dirt cheap and small. http://ladik.ladik.eu/?page_id=1417
Ymmv
lol. might end up having to go through three or four to find one good with Euro Levels like i had to before i got the solid butts one i have now. but. seems wayyyyy cheaper.
Eric! wrote:YOU'RE like having two pedals in one
with your...momentary fuck switch and all..
music, videos, in progress - http://www.youtube.com/c/behndytheactionindex wrote:QUADRACOCK BEHNDERFUCK
okay, Plan B - PANIC

- yeatsvisitslincoln
- committed
- Posts: 388
- Joined: Thu Feb 18, 2016 4:26 pm
- Location: Magic Land
Re: Can we talk about modular synths?
I have a MKIV and I mostly use it for the adder. But every once in a while I want to try something out in modular land and it turns out disting can do it. So, not always worth it, but nice to have around. Someone made a nice relatively concise guide that I have printed out for quick reference: http://www.vo1t.com/Euro/Illustrated/ES ... k4V4.5.pdf
- behndy
- Supporter
- Posts: 19864
- Joined: Tue Sep 15, 2009 3:06 am
- Location: Cali. East Bay Yo.
- Contact:
Re: Can we talk about modular synths?
curious - if one wanted to use a Disting as just a reverb, does it? does it WELL?
WELL DOES IT?
WELL DOES IT?
Eric! wrote:YOU'RE like having two pedals in one
with your...momentary fuck switch and all..
music, videos, in progress - http://www.youtube.com/c/behndytheactionindex wrote:QUADRACOCK BEHNDERFUCK
okay, Plan B - PANIC

- yeatsvisitslincoln
- committed
- Posts: 388
- Joined: Thu Feb 18, 2016 4:26 pm
- Location: Magic Land
Re: Can we talk about modular synths?
I only tried it once if that tell you much. But my guess is that Rings was coming too hot and that if I had attenuated the audio it would have been passable. Other people seem to think it's okay. I haven't revisited it since I got an Erbe Verb.behndy wrote:curious - if one wanted to use a Disting as just a reverb, does it? does it WELL?
WELL DOES IT?
- oscillateur
- IAMILF
- Posts: 2014
- Joined: Sun Oct 02, 2011 6:16 am
- Location: Tokyo
- Contact:
Re: Can we talk about modular synths?
Lesson from yesterday's patch : Mikrophonie works pretty well as an od/distortion/borderline fuzz. You just need an attenuator after it because, well, it's loud as fuck
.

- behndy
- Supporter
- Posts: 19864
- Joined: Tue Sep 15, 2009 3:06 am
- Location: Cali. East Bay Yo.
- Contact:
Re: Can we talk about modular synths?
lol. distort ALL THE THINGS.
Yeasty Lincolns - gotcha. yeah. i wanted to like the 'verbs in the Pico DSP. not.... that good though. still most enjoy going out into the RM1. super want an Ezekiel at some point too.
also, didna see a lot of vidjas on line of the SMR processing oscs, this is a quick thing with the MiniMod VCO going into the SMR -
https://www.instagram.com/p/BgF0zriDoSL/
Yeasty Lincolns - gotcha. yeah. i wanted to like the 'verbs in the Pico DSP. not.... that good though. still most enjoy going out into the RM1. super want an Ezekiel at some point too.
also, didna see a lot of vidjas on line of the SMR processing oscs, this is a quick thing with the MiniMod VCO going into the SMR -
https://www.instagram.com/p/BgF0zriDoSL/
Eric! wrote:YOU'RE like having two pedals in one
with your...momentary fuck switch and all..
music, videos, in progress - http://www.youtube.com/c/behndytheactionindex wrote:QUADRACOCK BEHNDERFUCK
okay, Plan B - PANIC

- oscillateur
- IAMILF
- Posts: 2014
- Joined: Sun Oct 02, 2011 6:16 am
- Location: Tokyo
- Contact:
Re: Can we talk about modular synths?
Yeah, I love big overdriven sounds and I can't lie...
I currently have several of modules that can do that and I want to increase that number even more (hence my interest in the Tallin, thanks for the detailed feedback btw) :
- Manhattan Analog CP3 (that thing is simple and wonderful)
- WMD/SSF Ultrafold (so many sound crunching options)
- Bastl Cinnamon
- Music Thing Mikrophonie
Then I can use the Noise Tools sample and hold as a samplerate reducer, and Maths can act as a sort of very unsubtle audio processor using the EOC/EOR outputs (maybe mixed with the slewed ones). And I can abuse both Chronoblob and PicoDSP into clipping but it's not always great sounding (can be nice sometimes though).
I need to test more things to see if I can get Rings to behave sort of like a weird overdrive too but I'm not sure that's really possible
.
Btw, talking of the Chronoblob, am I the only one who loves the clicks you get when freezing the buffer and who doesn't want to upgrade to the latest firmware because it removes these clicks ?
I currently have several of modules that can do that and I want to increase that number even more (hence my interest in the Tallin, thanks for the detailed feedback btw) :
- Manhattan Analog CP3 (that thing is simple and wonderful)
- WMD/SSF Ultrafold (so many sound crunching options)
- Bastl Cinnamon
- Music Thing Mikrophonie
Then I can use the Noise Tools sample and hold as a samplerate reducer, and Maths can act as a sort of very unsubtle audio processor using the EOC/EOR outputs (maybe mixed with the slewed ones). And I can abuse both Chronoblob and PicoDSP into clipping but it's not always great sounding (can be nice sometimes though).
I need to test more things to see if I can get Rings to behave sort of like a weird overdrive too but I'm not sure that's really possible

Btw, talking of the Chronoblob, am I the only one who loves the clicks you get when freezing the buffer and who doesn't want to upgrade to the latest firmware because it removes these clicks ?
- worra
- FAMOUS
- Posts: 1427
- Joined: Mon Dec 05, 2016 10:22 pm
- Location: MA
- Contact:
Re: Can we talk about modular synths?
behndy wrote:curious - if one wanted to use a Disting as just a reverb, does it? does it WELL?
WELL DOES IT?
I feel like if that's what you want, maybe just get a Pico DSP? I liked those reverbs when I had one.
https://foldednote.bandcamp.com
https://sunbeamer.bandcamp.com
https://www.instagram.com/_sunbeamer/
https://sunbeamer.bandcamp.com
https://www.instagram.com/_sunbeamer/
DRodriguez wrote:home is where the noise is
aen wrote:I'm pretty much kicked out of hipster beverage town.
- behndy
- Supporter
- Posts: 19864
- Joined: Tue Sep 15, 2009 3:06 am
- Location: Cali. East Bay Yo.
- Contact:
Re: Can we talk about modular synths?
jia. had it. didna like it.
Erbs is sexy and all the DESIRE, just too big.
hurrrrrm.
Erbs is sexy and all the DESIRE, just too big.
hurrrrrm.
Eric! wrote:YOU'RE like having two pedals in one
with your...momentary fuck switch and all..
music, videos, in progress - http://www.youtube.com/c/behndytheactionindex wrote:QUADRACOCK BEHNDERFUCK
okay, Plan B - PANIC

- behndy
- Supporter
- Posts: 19864
- Joined: Tue Sep 15, 2009 3:06 am
- Location: Cali. East Bay Yo.
- Contact:
Re: Can we talk about modular synths?
you are not alone suh. i have lagged on updating for that very reason.oscillateur wrote: Btw, talking of the Chronoblob, am I the only one who loves the clicks you get when freezing the buffer and who doesn't want to upgrade to the latest firmware because it removes these clicks ?
Eric! wrote:YOU'RE like having two pedals in one
with your...momentary fuck switch and all..
music, videos, in progress - http://www.youtube.com/c/behndytheactionindex wrote:QUADRACOCK BEHNDERFUCK
okay, Plan B - PANIC

- Dark Barn
- FAMOUS
- Posts: 1801
- Joined: Mon Feb 06, 2012 5:12 am
Re: Can we talk about modular synths?
I’m pretty fussy about how reverb sounds and I like the sound of the Distings OK, but to me they were free (added in firmware revision well after I bought the Distings.) In context of how much I feel like I paid for Disting verb it is hard to judge maybe as harshly as I should because; they are easy to clip, they sound a little grainy, and dialing things in on Disting’s step thru menu is a bit of a pain, esp. with things like reverb were there is interaction between parameters.
- yeatsvisitslincoln
- committed
- Posts: 388
- Joined: Thu Feb 18, 2016 4:26 pm
- Location: Magic Land
Re: Can we talk about modular synths?
You keep saying Erbe is too big, but honestly, it's so much more than a reverb. You could probably create a whole percussion track from it. Or get some pad droning. It just does things that reverb isn't supposed to do. Like I've begun to realize how specific the algorithms for reverb we normally use are. Erbe Verb gives you the keys to go beyond that and break it.
- baremountain
- FAMOUS
- Posts: 1164
- Joined: Mon Jun 27, 2016 2:19 pm
- Location: Dallas, TX
- Contact:
Re: Can we talk about modular synths?
FTFYyeatsvisitslincoln wrote:You could 100% definitely create a whole percussion track from it.

And yeah i mean if you just want reverb there is a whole market o' pedals. Euroverb seems to come in two flavors, small and either uncomfortable to use or uninteresting, and large with varied quality. Erbe is very very primo tho, I honestly have never played a reverb pedal or algorithm that I really liked until this baby came along.
#wheresthebirthcertificate #obamahoaxInner Vegas wrote:I don't think anyone is Obama
solo tunes:
completed works || loosey goosey releases
associated acts:
Raab Zamboni (fake jazz/real noise//sax, modular synth, editing, misc) || Field Guide (my best friends//sax on 2 tracks)
I make t-shirts, patches, koozies, buttons, CDs, sometimes tapes, and eventually i'll start working on pedals again. DM me for pricing!
- yeatsvisitslincoln
- committed
- Posts: 388
- Joined: Thu Feb 18, 2016 4:26 pm
- Location: Magic Land
Re: Can we talk about modular synths?
The fuckery you can do with it is unbeatable.



