4 way multiple?

[ronripper]

So I have a whole bunch of moog gear (MF-101,104sd,105,107 and the CP-251)

I am currently taking the MF-101 and CP{-251 out of my setup since they are the least used and space is not allowing everything I want (fortunately this means they can be moved into my synth setup, so not all is lost)

However I need the four-way multiple output on the CP-251 for this one amazing sound I can get from the 104sd and 105 used in conjunction...and without the four-way, it just doesn't work.

No matter how I try, the CP-251 will not fit with the board, also it is a shame to put in there if I am only using the four-way while everything else is going to waste.

Is there anyone out there who could make me, or tell me a way in which I can make my own stand alone four-way multiple.

In case I am unclear, the thing I need, is a box that I can plug my expression pedal into and be able to control (at least) 3 different CV jacks on my Moogerfoogers simultaneously.

The MP-201 is complete overkill for what I need, also will not fit on my board either...so the option is out.

Anyone know if this can happen? schematic, offer to build, or existing company/person who makes it already would be greatly appreciated.

Thanks in advance.

[Zerstorte Zelle]

So if you want to use the mult for on on 4- 1 ...
Meaning that 4 ins would hit one out or vice versa, couldn't you wire 4trs jacks to one?
Seeing as how you are talking about control voltage i dont think that youll have to worry about loss of any sort...

[Zerstorte Zelle]

Also i could mock it up in the next few days and test it on my moogerfoogers.

[ronripper]

So if you want to use the mult for on on 4- 1 ...
Meaning that 4 ins would hit one out or vice versa, couldn't you wire 4trs jacks to one?
Seeing as how you are talking about control voltage i dont think that youll have to worry about loss of any sort...

Yeah I need 4 jacks one to plug my expression pedal in to, then 3 more that send that signal the CV to 3 outputs.

I tried doing something like this with a Y-cable splitter, but it didn't work. Part of which is why I was hoping someone could help me out with this.


But if you could rig up something like that to try out I would be very interested to know how it works for you.


Thanks

[Dr. Sherman Sticks M.D.]

what baout something like this?
might work, no idea really tho just throwin it out there

[ronripper]

what baout something like this?
might work, no idea really tho just throwin it out there

That's a good idea, but again not sure if it would work the way I want it to or not.

Damn you confusing CV controls!

[glitch]

Bleak Mult from The Squarewave Parade.

bleak-mult-01.jpg (17.08 KiB) Viewed 2395 times

From http://www.thesquarewaveparade.com/bleak-mult.html:

"this is a simple dual passive multiple. its generally used in modular synths and used in the same way a ‘Y’ cable would, but with more options. first off there are 2 four channel mults. one on each side. but above the right most jack of one side you will see a red or blue dot, if you do not plug anything into this jack then it will work as a seven point mult. once you do insert a cable into the marked jack it breaks the two sides apart and give you a dual four channel mult. each jack has a sum total of 1k impedance just to play it safe when using odd gear that might not have taken multing into consideration, so that nothing is damaged, and of course it can process audio or CV. oh and there are three with blue stencils and four with red. cases are powder coated black."

Uhhhm, maybe perhaps...?

-- glitch.@#$%!