The Doom Room: ILF Edition

AxAxSxS · Post by **AxAxSxS** » Tue Oct 21, 2014 3:50 am

Edit: new page deserves a recap

whiskey_face wrote:wait a goddamb minute that holy mountain is a preamp? like pushing a 2v signal out for pro audio amps preamp!?

Iommic Pope wrote:That may solve your other problem whisk....

whiskey_face wrote:whats the output voltage?

KaosCill8r · Post by **KaosCill8r** » Tue Oct 21, 2014 4:20 am

Iommic Pope wrote:I'm highly doubtful that my work or bank balance will allow it to happen, but I might look into it...
That'd be a pretty rad road trip.
2 day drive to the grampians from bris?

Edit: hmmm, google maps says 22hrs, 2030km. Not outside the realm of possibility...

Like I said your more than welcome. And that offer stands for all the fuzz & doom lovers, foreign and domestic. Plenty of space to camp.

samzadgan · Post by **samzadgan** » Tue Oct 21, 2014 4:28 am

Why are there no doom bro's in Sydney... :no:

wildebelor · Post by **wildebelor** » Tue Oct 21, 2014 5:26 am

Whiskey, hit my up via PM and you can tell me your blues and I'll see what I can do!

also…. I just finished this:

Bottom half of my full stack!

Iommic Pope · Post by **Iommic Pope** » Tue Oct 21, 2014 6:06 am

KaosCill8r wrote:I am a fucking legend.

Dude, you are a fucking legend.
Maybe one day when the missus and I can line up some free time we might make it happen. I've not seen your part of the world and the invitation to camp there is just a great excuse to take the kids out and see the country.

Fuck.

It finally happened.

I became my old man.

Ax: :lol:

That is what I was driving at.

wildebelor · Post by **wildebelor** » Tue Oct 21, 2014 6:12 am

Also forgot to freaking reply…. Grampians is so close to me… Hit me up Kaos via PM and we can swap some deets

whiskey_face · Post by **whiskey_face** » Tue Oct 21, 2014 6:59 am

Ill pm you in 6 or so hours when i get home.

conky · Post by **conky** » Tue Oct 21, 2014 7:29 am

ryan summit wrote:aww thats cool as hell
you gonna go black on black
or dig that pearlized pickguard

Most likely. That or tortise shell. I can't find any replacements online though. Warmoth doesn't fit and everywhere else has cutouts for the Jazzmaster pickups.

samzadgan wrote:
Thats a nice score man, i love the black block inlays...are those short scale or 25"? I'd leave the mother of pearl pickgaurd too...what are the pickups like?

Yeah, the block inlays are what attracted me to it at first. The neck is really nice. 25" scale. The pickups aren't all that. kinda muddy. I adjusted it and got it a little clearer sounding but still, it sounds weak compared to the Duncan Distortions in my LP and SG.

t-rey wrote:
conky wrote:So this happened last night.

That's all kinds of awesome.

Ancient Astronaught wrote:I both love you and hate you right now....

You'll really love / hate me for this... When I got it GC had a 20% off going on this past weekend. Walked out the door with it for about $425. Then yesterday I was looking up some cases for it on ebay and found a store on there selling them for $379. I took a patient to the cath lab right after that and while I was up there I swung back by GC to see if they would honor that price match. They did and with the difference I put that towards a Duncan Distortion and only came out of pocket $30. Put it in last night after work and it sounds a million times better.

D-Day wrote:
conky wrote:I bought it on vinyl (got the super limited green splatter just cause it looks amazing). It is good, but it is nowhere near as good as Natasha.

[youtube]http://www.youtube.com/watch?v=YRR-9ZA6vwg[/youtube]

Whoah this is killer too! Listening now. Update! I'm like 28 minutes in now and this rules really hard. Thanks Conky!

Oh man that is awesome! I've been jonesing for such an axe.

Thought you might dig that if you liked Mass and Volume. If you get a chance to check one out I'd definitely play it just for the neck. Pickups leave a little bit to be desired but its so comfortable to play and it sounds great unplugged, really nice, thick, and balanced. It really shows through with the Duncan in the bridge.

Ancient Astronaught · Post by **Ancient Astronaught** » Tue Oct 21, 2014 8:29 am

conky wrote:You'll really love / hate me for this... When I got it GC had a 20% off going on this past weekend. Walked out the door with it for about $425. Then yesterday I was looking up some cases for it on ebay and found a store on there selling them for $379. I took a patient to the cath lab right after that and while I was up there I swung back by GC to see if they would honor that price match. They did and with the difference I put that towards a Duncan Distortion and only came out of pocket $30. Put it in last night after work and it sounds a million times better.

Your right, your badassery level has grown +2 and surpassed my own.... I must admit defeat.....

conky · Post by **conky** » Tue Oct 21, 2014 8:42 am

Ancient Astronaught wrote:
conky wrote:You'll really love / hate me for this... When I got it GC had a 20% off going on this past weekend. Walked out the door with it for about $425. Then yesterday I was looking up some cases for it on ebay and found a store on there selling them for $379. I took a patient to the cath lab right after that and while I was up there I swung back by GC to see if they would honor that price match. They did and with the difference I put that towards a Duncan Distortion and only came out of pocket $30. Put it in last night after work and it sounds a million times better.

Your right, your badassery level has grown +2 and surpassed my own.... I must admit defeat.....

Well, I doub't I'll stumble on a deal and have good luck like that for a long time. Especially since my recording computer at home took a shit. I know I should take the guitar back and put that money towards getting a new comp but I can't. Gonna sell off some pedals to fund that.

odontophobia · Post by **odontophobia** » Tue Oct 21, 2014 9:25 am

Ancient Astronaught wrote:
conky wrote:You'll really love / hate me for this... When I got it GC had a 20% off going on this past weekend. Walked out the door with it for about $425. Then yesterday I was looking up some cases for it on ebay and found a store on there selling them for $379. I took a patient to the cath lab right after that and while I was up there I swung back by GC to see if they would honor that price match. They did and with the difference I put that towards a Duncan Distortion and only came out of pocket $30. Put it in last night after work and it sounds a million times better.

Your right, your badassery level has grown +2 and surpassed my own.... I must admit defeat.....

whoa.

such a fucking score conky.

i know some people are sort of weirded by the black block inlays on the maple neck but i really like it.

Ancient Astronaught · Post by **Ancient Astronaught** » Tue Oct 21, 2014 9:51 am

conky wrote:Well, I doub't I'll stumble on a deal and have good luck like that for a long time. Especially since my recording computer at home took a shit. I know I should take the guitar back and put that money towards getting a new comp but I can't. Gonna sell off some pedals to fund that.

It's funny how that kind of luck comes in streaks and then just evaporates into thin air. Are you gonna build a PC or a Mac? I've been running a Mac mini for quite a while now as my recording comp and have absolutely ZERO complaints and or issues. Plus their relatively cheap in the scheme of mac's. Just food for thought.

odontophobia wrote:i know some people are sort of weirded by the black block inlays on the maple neck but i really like it.

That absolutely my favorite fretboard combo out there hands down. I have a big head stock strat neck from an old telemaster project thats maple with big black block inlays that i really wanna use for something. Unfortunately I got get a couple frets pressed back in there first......

conky · Post by **conky** » Tue Oct 21, 2014 11:07 am

Ancient Astronaught wrote:
conky wrote:Well, I doub't I'll stumble on a deal and have good luck like that for a long time. Especially since my recording computer at home took a shit. I know I should take the guitar back and put that money towards getting a new comp but I can't. Gonna sell off some pedals to fund that.

It's funny how that kind of luck comes in streaks and then just evaporates into thin air. Are you gonna build a PC or a Mac? I've been running a Mac mini for quite a while now as my recording comp and have absolutely ZERO complaints and or issues. Plus their relatively cheap in the scheme of mac's. Just food for thought.

odontophobia wrote:i know some people are sort of weirded by the black block inlays on the maple neck but i really like it.

That absolutely my favorite fretboard combo out there hands down. I have a big head stock strat neck from an old telemaster project thats maple with big black block inlays that i really wanna use for something. Unfortunately I got get a couple frets pressed back in there first......

Been thinking about going with a Mac but I don't really have any experience with them other than watching my old bassist recording my past band in his studio. Whatever I end up with I'd like to run this 8 input Firepod preamp into it for recording. I could get the whole band minus vocals to live track the songs in the practice space that way.

And I agree on the big headstock. If this one had one it would be perfect.

Ancient Astronaught · Tue Oct 21, 2014 11:23 am

If you get a two button mouse not much is really different in the interaction with the comp other than the buttons to mini / max / close are on the opposite side. The difference lies in that you'll have no crashing and minimal driver issues if any at all.

Also Presonus + Mac = recipe for awesomesauce with no issues :thumb:

What DAW do you run?

new05002 · Post by **new05002** » Tue Oct 21, 2014 11:32 am

Dropped a bunch of new etched custom pedals that I am building

Custom Slomatics pedal, 2 parallel fuzz circuits, plus a LFO/Synth. All mixed in parallel

PCB for this design (Ver2 design)

Custom FT for Belzebong

Custom FT for Badr(Herder, Snowburner)

MindBender (Ge Fuzz)

Skips ODB Ver 2

Sonny's VT

Reverse Etch Germanium Cthulhu (for myself for a change)

ilovefuzz.com

The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition

Re: The Doom Room: ILF Edition